Need help?Do you have a question about the Bryston ST Series Amplifiers 8B and is the answer not in the manual?
General| Power Output (8 Ohms) | 300 W |
|---|---|
| Power Output (4 Ohms) | 500 W |
| Power Output (Bridged 8 Ohms) | 1000 W |
| Total Harmonic Distortion | < 0.005% |
| Damping Factor | > 500 |
| Input Sensitivity | 1.5 V |
| Input Impedance | 20 kOhms |
| Gain | 29dB |
| Frequency Response | 20 Hz - 20 kHz |
Details Bryston's 20-year warranty for original and subsequent owners, covering parts, labor, and shipping.
Advises on proper amplifier placement for convection cooling and connecting power cords and speakers.
Explains the function of bicolor LEDs indicating power on/overload and potential speaker damage.
Describes the 3B-ST stereo amplifier's dual modules, power supply, and output devices.
Details the 4B-ST stereo amplifier's dual modules, higher power supply, and output devices.
Explains the 7B-ST amplifier's dual modules, power supply, and bridging capabilities for mono operation.
Outlines the 8B-ST's four independent modules and configuration flexibility for multi-channel audio/video.
Highlights THX versions, fuse symbol identification, and 120V/60Hz line operation.
Details the balanced XLR and unbalanced RCA inputs and gold-plated binding post outputs.
Explains how to operate amplifiers in bridged (monaural) mode for increased output voltage.
Discusses the 8B-ST's ground lift switch and its role in preventing system hum.
Illustrates and labels the rear panel connections and controls for 3B-ST and 4B-ST models.
Shows and labels the rear panel connections, modes, and fuses for the 7B-ST amplifier.
Depicts and labels the rear panel connections, remote on/off, and fuses for the 8B-ST amplifier.
Explains how to connect and use the optional remote on/off feature with delay settings.
Describes connecting the remote signal to the center/left terminal for mute-switch controlled operation.
Details connecting to center/right terminals for operation tied to the preamp power supply switch.
Summarizes the 5BST as a 3-channel version of the 8BST, referencing 8BST specs for details.
Illustrates and labels the rear panel connections for the 5BST amplifier.
Explains the function and adjustment of front panel input level potentiometers for gain control.
Shows front panel diagrams highlighting input level controls for different amplifier models.
Details the terms and conditions of Bryston's 20-year limited warranty for its products.
To Next Page
