Need help?Do you have a question about the Bryston ST Series 9B ST and is the answer not in the manual?
General| Type | Solid State |
|---|---|
| Channels | 5 |
| Power per channel (8 Ohms) | 120 W |
| Power per channel (4 Ohms) | 200 W |
| Bridged mono power (8 Ohms) | 400 W |
| Input Impedance | 20 kOhms |
| THD+N | < 0.005% |
| Damping Factor | > 500 |
| Frequency Response | 20Hz - 20kHz (±0.1dB) |
Details Bryston's 20-year warranty, coverage, and service, including conditions that void the warranty.
Explains the 9B-ST is a multi-channel amplifier with five independent modules and power supplies.
Provides guidance on ventilation, power connections, and general setup for optimal operation.
Describes balanced and unbalanced input options, impedance, and sensitivity settings.
Explains the benefits of balanced cables and recommendations for unbalanced cables.
Details the gold-plated output binding posts for speaker connections and wire types.
Explains the function of bicolor LEDs indicating power, overload, distortion, and thermal conditions.
Describes the function of the remote power control for THX units, linking to external devices.
Illustrates a typical hookup between a surround sound processor and the 9BST, showing balanced and unbalanced connections.
Specifies the correct "BAL THX" or "UNBAL THX" slide switch settings for THX systems.
Details settings for the 9B Pro THX, including rotary gain control and slide switch for THX systems.
Outlines the 20-year warranty, coverage, exclusions, and customer rights.
Lists technical specifications for the 9B-120-R and 9B-120-P channels, including power rating and impedance.
Provides physical dimensions and shipping weight for rack mount and 17" models.
To Next Page
