Need help?Do you have a question about the Bryston 7B SST and is the answer not in the manual?
Guidance on keeping original packaging and essential ventilation for amplifier operation.
Instructions for connecting speakers and essential AC power requirements for the amplifier.
Details on choosing between balanced and single-ended inputs and their connector types.
Guidance on selecting the appropriate gain setting based on the source.
Description of the level control for attenuating input signal, noted for pro models.
Details on connecting speakers using banana plugs, spade lugs, or bare wire.
Instructions for using the touch-sensitive switch to power the amplifier on and off.
Explanation of the LED indicator states for power, mute, clipping, and thermal shutdown.
Details on the main circuit breaker, AC power cord connection, and voltage checks.
Configuration options for local power-up via the front panel or auto-power from a switched outlet.
How to use a 4-12V control voltage for remote power-up and activation of other equipment.
Graph illustrating the typical band-pass noise characteristics of the amplifier.
Graph displaying the typical Total Harmonic Distortion plus Noise (THD+N) content.
Graphs showing the amplifier's output across different frequencies for various loads.
Graphs illustrating the phase shift characteristics at different frequencies.
Graph showing how Total Harmonic Distortion plus Noise varies with frequency.
Graph indicating Intermodulation Distortion (IMD) performance across frequencies.
To Next Page
General
