Need help?Do you have a question about the Bryston 7b3 and is the answer not in the manual?
General| Power Output (8 Ohms) | 600W |
|---|---|
| Power Output (4 Ohms) | 900W |
| Signal-to-Noise Ratio | > 110 dB |
| Input Impedance (Balanced) | 20 kOhms |
| Input Impedance (Unbalanced) | 10 kOhms |
| Gain | 29 dB |
| Damping Factor | > 500 |
| Inputs | XLR, RCA |
| Outputs | Binding Posts |
| Weight | 60 lbs |
| Power Consumption | 1200 Watts |
| Type | Solid State |
| Total Harmonic Distortion | <0.005% |
Proper airflow requirements and heat dissipation for safe operation.
Steps for safely connecting the amplifier to AC mains power.
How to connect speakers to the amplifier's output binding posts.
How to connect audio sources via balanced or single-ended inputs.
Explains LED states for power, mute, clipping, and thermal shutdown.
Terminals for connecting loudspeakers.
Protective circuit breaker for the amplifier.
To Next Page
