Need help?Do you have a question about the Bryston B100 and is the answer not in the manual?
General| Power Output | 100W per channel into 8Ω |
|---|---|
| Signal to Noise Ratio | >110dB |
| Input Sensitivity | 500mV for full output |
| Dimensions | 17" W x 4.5" H x 15" D |
| Inputs | 1 XLR |
| Outputs | 1x speaker binding posts |
| Phono Option | Available |
| DAC Option | Available |
| Total Harmonic Distortion | <0.005% 20Hz-20kHz at 100 watts |
Covers mains power, speakers, pre-amp/power amp separation, and wired RS232 interface.
Details analog RCA inputs/outputs and digital audio inputs.
Details commands and operation for RS232 serial control.
Lists key performance metrics for amp and preamp sections.
Provides general specs including dimensions and weight.
To Next Page
