EasyManua.ls Logo

Bryston B60R User Manual

Bryston B60R
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INTEGRATED AMPLIFIER
OWNER’S MANUAL
for Models
B60R, B60RP, B60RDA
B60R
Question and Answer IconNeed help?

Do you have a question about the Bryston B60R and is the answer not in the manual?

Bryston B60R Specifications

General IconGeneral
Power Output60 Watts per channel into 8 ohms
IM Distortion< 0.01%
Signal-to-Noise Ratio> 100 dB
Input Impedance10 kOhms
OutputsBinding Posts
Total Harmonic Distortion< 0.005%

Summary

Important Safety Instructions

Introduction

Setup

Connections

Pre-Amp Out / Power-Amp In Connections

Input & Output Connections

Headphone Jack

Tape Loop

Front Panel Controls

Volume Control

Rotary control that varies the output level to the 'MAIN OUTPUTS'.

Balance Control

Rotary control that adjusts the left-versus-right channel levels.

Source Selector Switch

Rotary switch determining which input appears at 'TO TAPE' outputs and Main outputs.

Tape/Normal Switch

Monitors the recorded signal on recorders or processed signal when using a signal processor.

Loudspeaker Outputs

B60 Remote Control

Specifications

General Specifications

Details dimensions, rack mount version, and weight of the amplifier.

Preamplifier Section Specifications

Covers frequency response, maximum output, sensitivity, and noise.

Power Amplifier Section Specifications

Includes output power, THD+N, noise, slew rate, damping factor, and bandwidth.

Digital Input Specifications

Additional specs for B60DA/B60RDA: sample rate, word length, data format, THD+N.

Phono Input Specifications

Additional specs for B60P/B60RP: THD+N, noise, RIAA accuracy, sensitivity.

Various Speaker Wire Terminations

Amplifier Output Binding Posts

Model Overview

B60 / B60R Models

Stereo 60 Watt per channel amplifier with 4 stereo analog inputs, processor loop, tape loop, headphone jack.

B60P / B60RP Models

Stereo 60 Watt per channel amplifier with phono input, 3 stereo analog inputs, processor loop, tape loop, headphone jack.

B60DA / B60RDA Models

Stereo 60 Watt per channel amplifier with digital audio SPDIF input, 3 analog inputs, processor loop, tape loop, headphone jack.

Bryston Limited Warranty

Audio Circuits Warranty

Warranted free from manufacturing defects for twenty (20) years including parts and labour.

Digital Circuits Warranty

Warranted for five years from the original date of manufacture, including parts and labour.

Motorized Parts Warranty

Warranted for three years from the original date of manufacture, including parts and labour.

Warranty Transferability and Coverage

Warranty is transferable and commences with the original date of manufacture.

Conditions That Void Warranty

Warranty void if damaged, abused, tampered with, or not following operating instructions.

Service Contact Information

Contact Bryston's repair centers for return authorization and service details.

Servicing and Fuses

Fuse Replacement

All fuses are 5mm x 20mm, time lag type, accessible by removing the top cover.

Recommended Fuses

Lists recommended fuse types for 100/120VAC and 220/230/240VAC models.

Related product manuals