Need help?Do you have a question about the Bryston 7BSST2 and is the answer not in the manual?
Contact details for Canadian service centers, including postal and courier addresses.
Contact details for US service centers, including address, phone, and fax.
Information on finding local distributors and contacting Bryston for service outside North America.
Importance of unrestricted airflow for cooling and required clearances for the amplifier.
Proper AC voltage selection and circuit requirements for the amplifier's operation.
Guidance on selecting power conditioners to avoid hindering current delivery to high-power amplifiers.
How to use the front panel power switch for initiating the amplifier's power-up sequence.
Explanation of LED states: unlit (no power), red (mute), green (normal), flashing red (clipping), orange (thermal shutdown).
Describes the LED color changes during the amplifier's power-up sequence.
Interpreting LED states for no power, clipping, and thermal shutdown for troubleshooting.
Allows switching between balanced and single-ended audio inputs.
Accepts XLR or 1/4" Tip-Ring-Sleeve phone plugs for balanced audio input.
Accepts RCA or Phono connectors for unbalanced audio input.
Settings for selecting input gain (29dB or 23dB) based on source and preference.
Attenuates the input signal level from 0dB through -14dB for PRO model variants.
Details for connecting loudspeakers, including plug types, phase, and recommended load.
Function of the main power switch and circuit breaker, essential for operation and remote turn-on.
Specifies the type of power cord connector used for AC power input.
How to set the amplifier for local or external (remote) power-on control.
Details on connecting an external control voltage (4-12V AC/DC) for remote operation.
To Next Page
General
