8
The MULTICAREIN device uses a data-chip which is contained
in the strips box.
It is necessary to change the data-chip in the following situations:
a. When you want to change analyte.
b. Before using a new strips box.
How to insert the data-chip
1. Remove the data-chip from the strips box.
2. Insert the data-chip in the slot placed on the lateral side of the device.
3. Gently press the data-chip up to the complete insertion.
INSERTION OF THE DATA-CHIP
When you switch on the device check always that the date (month, day and year) and time are correctly
set to obtain accurate results (see page 18).
THE MEASUREMENT
To Next Page
Loading...
