Bside ADM02 User Manual

2. Safety note
Warning
To avoid possible electric shock or personal injury and to
avoid possible damage to the meter or to the equipment
under test, adhere to the following rule:

Do not apply more than the rated voltage, of marked on
the meter, between the input terminal and grounding
terminal..

Do not apply voltage between COM and OHM terminal,
in the resistance measuring state.
 Do not measure current with test lead inserted into
voltage or OHM terminal.

Do not expose the instrument to the direct sun light,
extreme temperature and humidity or dew full.

Inspect the test lead for damaged insulation or exposed
metal.
 Before measuring current, check the Meter”s fuses and
turn off power to the circuit before connecting the meter
to the circuit.
 Disconnect circuit power and discharge all high voltage
capacitors before testing continuity, diode, resistance,
capacitance or current.
Note international Electrical Symbol.
Dangerous
Voltage
Ground
AC
Alternating
current
Warning
see explain in manual
1

Bside ADM02 Specifications

General

Brand	Bside
Model	ADM02
Category	Measuring Instruments
Language	English