Bside ADM01 User Manual

Table of Contents
1. Introduction ………………………………………………. 1
2. Safety note ……………………………………………..… 2
3. Explanation of Controls and Indicators …………………... 3
3-1. Product illustration ………………………………………. 3
3-2. Functional push button ……………………………………. 4
3-3. LCD display ………………………………………………. 5
4. Specification ………………………………………………. 5
4-1. General Specification ……………………………………... 6
4-2. Electrical Specification …………………………………. 7- 9
5. Measurement operation ………………………………….. 9
5-1 DC voltage & AC voltage measurement ………………... 9
5-2. Resistance measurement …………………………….….. 10
5-3. Diode & Continuity check ………………………..…..… 11
5-4. Frequency Measurement [ Only for ADM01 ] …….…… 11
5-5. DC/AC µA or mA measurement ………………….……. 12
5-6. DC/AC 10A measurement …………………………..…. 12
5-7 Temperature measurement [ Only for ADM02 ] ………..…. 12
6. Maintenance ………………………………………………. 13
6-1. Replacing the battery …………………………...………. 13
6-2. Replacing the fuse ………………………………………. 13
6-3. Cleaning and Decontamination …………………………. 13

Bside ADM01 Specifications

General

Model	ADM01
Type	Digital Multimeter
Continuity Test	Yes
Diode Test	Yes
NCV	Yes
Backlight	Yes
Auto Power Off	Yes
Frequency Range	10Hz-10MHz
Measurement Range	As per individual functions
Resolution	As per range
Material	Plastic

Summary

Introduction

Safety Note

Controls and Indicators Explanation

Meter Illustration

Overview of the multimeter's exterior view and labeled components.

Functional Push Buttons

Details the function and operation of the multimeter's push buttons.

Display Indicators

Explains the meaning of various symbols and indicators shown on the LCD display.

Specifications

General Specifications

Provides general specifications like display type, overload protection, and auto power-off function.

Electrical Specifications

Details the electrical specifications including DC/AC voltage, resistance, diode, continuity, current, and frequency.

Measurement Operations

DC and AC Voltage Measurement

Step-by-step guide for measuring DC and AC voltages with safety warnings.

Resistance Measurement

Instructions for measuring resistance, including notes on accuracy and limitations.

Diode and Continuity Check

Procedures for checking diodes and continuity, including buzzer operation.

Frequency Measurement (ADM01)

Guide for performing frequency measurements, specific to the ADM01 model.

DC/AC Microampere or Milliampere Measurement

Steps for measuring DC and AC current in microampere and milliampere ranges.

DC/AC 10A Measurement

Instructions for measuring high DC and AC currents up to 10A, with safety notes.

Temperature Measurement (ADM02)

Procedure for measuring temperature using a K-type probe, specific to the ADM02 model.

Maintenance

Replacing the Battery

Steps for replacing the multimeter's battery to maintain normal operation.

Fuse Replacement

Procedure for replacing a defective fuse, emphasizing safety precautions.

Cleaning and Decontamination

Guidelines for cleaning the multimeter using soft cloths and avoiding solvents.