Bside ADM01 - Maintenance; Replacing the Battery; Fuse Replacement; Cleaning and Decontamination

③ Remove old battery and snap new one into battery holder
6-2. Fuse replacement
Replacing the defective fuse should the done according to the
following procedure.
① To avoid electrical shock, remove the test lead and any input
signal before opening the bottom case.
② Open the botton case and then remove the defective fuse
and insert a new fuse of the same size and rating.
③ Replace the bottom case and reinstall all the screw.
6-3.Cleaning and Decontamination
The meter can be cleaned with soft clean cloth to remove any oil,
grease or grim. Do not use liquid solvent or detergent.
13