Bside ADM02 - Specification; General Specification

¸ mVA
mV ,V is unit of voltage
¸ A, mA, A is unit of current
１ Indicate negative reading
4．Specification
4-1. General Specification
◤ Auto ranging DMM , that full scale is 2000 counts
◤ Display : 3 1/2 digit LCD display..
◤ Over load protection: Used the PTC protection circuit for
Resistance, temperature measurement.
◤ DATA HOLD function
◤ MAX value hold function
◤ Back Light
◤ Low battery indication
◤ Auto Power OFF. : If the meter is idle for 15 minutes (idle
time), the meter automatically turns the power off. After
auto power-off, pushing any of the push button or
changing the rotary switch can turn on the meter again.
NOTE: ，1－After auto power off in the AC mode, if changing
the rotary switch to the DC mode, the
Re-power on if disabled.
(2) The meter enters sleep mode after Auto power
off. If press ‡ HOLD· push button to re-power
on in the sleep mode, the auto power off
function is disabled.
◤ Operating temperature & Humidity:
0 ~ 40₤ (32 ~104 ₦ ) & < 80% RH
◤ Storage temperature & Humidity:
-10 ~ 50₤ (14 ~ 122 ₦ ) & <70%RH
◤ Power Supply: 9V Battery(6F22 or 1604A Type) x 1pc.
◤ Safety Class: IEC 61010-1, CAT II 600V.
● Dimension(L x W x H) & Weight:140 x 67 x 30mm, Approx.
5