2
FCS-930/960
This equipment has been tested and found to comply with the
following European Standards for Electromagnetic Compatibility.
Emission Specification EN55013 1990 (Associated equipment)
Immunity SpecificationEN50082/1 1992 (RF Immunity, Fast
Transients and ESD)
Mains Disturbance EN61000/3/2 1995
For continued compliance ensure that all input and output cables are
wired with cable screen connected to pin 1 of the XLR. The input XLR pin
1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good emc compatibility.
To Next Page
Loading...
