20
FCS-930/960
9.0 Technical Specifications
Technical Specifications
A steel security cover is available for the FCS-930/960 which is secured
by two out of the four rack mounting screws. It is retrofittable and does
not require any modification to the unit. Please refer to the factory for
availability.
Input Section 10kΩ electronically balanced, +20dBu
maximum input level via XLR3-31 or
equivalent.
Output Section Electronically balanced and floating,
capable of driving +20dBu into 600Ω or
greater via XLR3-32 or equivalent.
System Performance
Frequency response ±0.25dB from 20Hz to 20kHz
THD at +4dBu (faders flat) <0.005% 22Hz to 22kHz
Output noise (faders flat) <-90dBu, 22Hz to 22kHz unweighted
Channel separation >80dB from 22Hz to 22kHz
Gain control range ±10dB
Peak indicator +18dBu
Bypass Passive fail-safe bypass relay
Filters
Type MFB Constant Q
Frequencies, per channel: 30 off on 1/3 octave ISO centres
25Hz to 20kHz
Boost/cut range Nominal ±10dB. Note 1
Mode Selectable normal or fine response
High pass filter 18dB/Oct Butterworth sweepable 20Hz
to 250Hz
Power
Voltage 30VA 50-60Hz, 90-120Vac or 190-250Vac
selectable externally.
2m power cord connected via IEC socket.
Dimensions/Weight
FCS-930: 482x89x227mm.
(19"x3.5"x8.9")
4kg net, (8.8lbs).
FCS-960: 482x132x227mm.
(19"x5.25"x8.9")
4.3kg net, (9.5 lbs).
Options
Transformer balancing Input and output.
Security cover Metal cover, secured by rack screws.
To Next Page
Loading...
