21
Technical Specifications
In keeping with our policy of continued improvement, BSS Audio
reserve the right to alter specifications without prior notice.
Note 1. Although the nominal boost and cut range is specified as
±10dB, the actual figure reached is dependent on the number of
adjacent faders selected, as is the case for all equipment of this type.
Reference to the amplitude/frequency plots shown within this manual
will clarify the position.
Should you experience any difficulty in operating this equip-
ment please contact your local dealer who will also be able to
supply you with information on the full range of equipment
manufactured by BSS Audio .
DPR-402 2 Channel Compressor, De-esser, and Peak Limiter
DPR-404 4 Channel Compressor and De-Esser
DPR-502 2 Channel Noise Gate with Midi Interface
DPR-504 4 Channel Noise Gate
DPR-901 Dynamic Equaliser
EPC-760 High Power Audio Amplifier
EPC-780 High Power Audio Amplifier
FCS-926 Varicurve Dual Equaliser/Analyser
FCS-920 Varicurve Dual Equaliser/Analyser
FPC-900 Varicurve Remote Control System
FCS-930 1 Channel 30 Band Graphic Equaliser
FCS-960 2 Channel 30 Band Graphic Equaliser
FDS-310 2/3/4 Way Variable Electronic Crossover
FDS-318 Stereo Multimode Electronic Crossover
FDS-360 Programmable Electronic Crossover with Limiters
and Phase Correction.
MSR-604 II 4 Channel Active Microphone Signal Distribution
and Splitting System.
AR-116 Active Direct Injection (DI) Box.
AR-117 Phantom Powering Accessory for AR-116.
AR-130 System Polarity Checker.
AR-125 Lead and Fuse Checker.
AR-204 Transformer Line Balancing Unit.
AR-416 4-Channel Active D.I.
To Next Page
Loading...
