39
Polarity
Polarity is switchable between Normal or Inverted.
Using the < and > navipad keys or rotary encoder the polarity of the output signal can be in-
verted. If the polarity is changed on a linked Output, both Outputs will change to the same
selection.
Outputs Polarity
Outputs Delay Linking
When using Delay Linking, it is recommended that the adjustment order is:
1. Driver alignment within cabinets
2. Cabinet alignment within clusters
3. Delay Alignment between clusters. In 2 channel 3 Way and LCR 2 way, the default
settings include Delay Linking as well as Stereo Linking.
To Next Page
Loading...
