BT 1100 User Manual

2 Connect the base unit
power supply unit to a
power socket
The power supply unit must remain
plugged in all the time.
8
Quartet 1100 User Guide – Edition 5 – 17.8.00
Setting up
Follow these steps to set up your Quarter 1100 ready for use.
Plan the location
Situate your Quartet 1100 close
enough to the mains power socket
and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away
from other electrical products to
avoid interference.
Do not situate the product in the
bathroom or other humid areas.
Your Quartet 1100 works by sending
and receiving radio signals between
the base unit and the handset.
The strength of the signal depends
on where you site the base unit and
how the aerial is deployed.
The higher the base unit is located,
the better. An upstairs room is ideal.
Your product can be wall mounted,
for more information see page 26.
1 Plug the power supply
unit cord into the back
of the base unit

BT 1100 Specifications

General

Answering Machine	Yes
Phonebook Capacity	50 entries
Caller ID	Yes
Talk Time	10 hours
Standby Time	100 hours
Number of Handsets	1
Type	DECT Telephone
Display Type	LCD
Range	300 meters