BT 1100 User Manual

20
Quartet 1100 User Guide – Edition 5 – 17.8.00
Note
Make a note of the handset number
by writing it on the quickdial label
on the additional handset’s charger.
To transfer a call
During your call press the
SECRECY button and then
the handset number that
you want to transfer the
call to.
The called handset will ring.
If the call is not answered
within 30 seconds the calling
handset will ring.
Press the
TALK button to
speak to the caller.
If after a further 30 seconds
the call is not taken the
caller will be disconnected.
Transferring calls
You can transfer calls between
handsets that are registered to the
base unit.
Secrecy
To set the handset number
Each additional handset
must be assigned an identity
number (2, 3 or 4). Your
Quartet 1100 handset is
already registered as
HANDSET 1. A Quartet
additional handset is pre-set
as HANDSET 2. However,
further additional handsets
can be numbered as they are
added.
Press the
QUICKDIAL
button.
Press the
SECRECY button.
Enter the handset number
between
(2 and 4).
Press the
QUICKDIAL
button. You will hear a beep
confirming that the new
number has been stored.
Q
u
i
c
k
d
i
a
l
Q
u
i
c
k
d
i
a
l
Secrecy
2-4

BT 1100 Specifications

General

Answering Machine	Yes
Phonebook Capacity	50 entries
Caller ID	Yes
Talk Time	10 hours
Standby Time	100 hours
Number of Handsets	1
Type	DECT Telephone
Display Type	LCD
Range	300 meters