Check that your Freestyle 1200 is
complete. When you unpack, you
should have:
• Freestyle 1200 handset.
• Freestyle 1200 base unit with
telephone line cord attached.
• Mains power adaptor plug.
• Wall mounting bracket with
screws.
• Remote access quick reference
card.
• Spare Quickdial directory label.
Setting up Follow these steps to get your
Freestyle 1200 ready for use.
Electrical storm warning
1
During periods of electrical storm,
you are advised to disconnect your
apparatus because damage may
occur.
2 If a fault occurs during the 12-month
warranty period and it is due to
accidental or wilful damage
(including lightning and electrical
damage), BT will not replace or
repair free of charge.
Important
As this product is rechargeable, it is
normal that a certain amount of heat
will be produced in its day-to-day
operation. While this is entirely safe,
we advise against placing this product
on antique, veneered or wooden
surfaces as damage may occur.
Plan where you will put your
Freestyle 1200.
• It should be within two metres of a
power socket and the phone socket.
• You need enough room for the base
unit’s telescopic aerial to be fully
extended.
• For the best operating conditions, try
to place the base unit away from
large metal objects and other
electrical appliances.
5
To Next Page
Loading...
Need help?
General
