BT 300 - Operating the Monitor; Powering On and Off

12
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
12
Switching on/off
Switch the Baby unit on
1. Press and hold the
button for 1 second. The
nightlight will briefly illuminate and then the green
LED will flash until it links with the Parent unit.
Once linked the green LED will remain on.
Switch the Parent unit on
1. Press and hold the
button on the Parent unit
until all the LEDs on the top of the unit briefly
illuminate. The green Link indicator will flash.
Once the units are linked, the green Link indicators
on the Parent and Baby units will stop flashing and
remain a steady green. The units are now ready
to use.
Switch the Baby unit off
1. Press and hold the
button on the Baby unit.
The green Link indicator will switch off.
Switch the Parent unit off
1. Press and hold the
button on the Parent unit
until an audible alert sounds. The green Link
indicator will switch off.
Using your BT Digital Baby Monitor 300
2250 Baby Monitor 300 UG Iss2.[2].indd 12 10/04/2014 11:06