BT BT2100 - Enabling and Disabling Eco Mode

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Settings 43
4. If the system PIN is not 0000 you will be prompted
to enter it, then press
. If it is, you will continue
straight to step 5.
5.
Clear <handset or base> user d at a? is displayed,
press
.
6.
Clearing user data… is displayed. Once finished,
<handset or base> user data deleted is displayed
and you will hear a confirmation tone.
Turn eco mode on or off
With eco mode on, the handset only uses the
transmission power it needs to communicate with the
base rather than full transmission power all the time.
1. Select
Menu , scroll to Settings and press .
2.
Sounds is displayed, press until Eco Mode is
displayed and press
.
3. Press
or to select On or Off then press to
save.
Saved will be displayed and you will hear a
confirmation tone (if set to on).
The default setting is off.
If you have more than
one handset you’ll need
to set eco mode on each
handset individually.