BT DTR-T4000 User Manual

5
Use one remote instead of two.
1 Turn on your TV, then look up the
four-digit code for your brand of TV
(see the table on the right). Then
hold down and until the
blue light on the remote flashes
three times.
2 When the flashing stops, enter your
TV brand code. The blue light will
flash another three times.
3 Hold down until your TV turns
off. The blue light will blink while it
turns off.
Use your BT TV remote to control everything
4 When your TV turns off, let go of
and press it again – your TV
should turn back on. Next try Vol ,
Vol .
For some TV brands, you need to
press instead of . So if it’s not
working, try this step again
but press .
5 If the volume control works, press
. And that’s it!
If it doesn’t work, start again from
step 3.
TV brand codes
Goodmans 2037
Hitachi 2424
JVC 2788
LG 2992
Panasonic 3846
Philips 3951
Samsung 4483
Sharp 4848
Sony 4985
Toshiba 5523
If your make of TV isn’t listed here,
you can find a full list of brands and
codes at bt.com/help/remote

BT DTR-T4000 Specifications

General

Brand	BT
Model	DTR-T4000
Category	Set-top boxes
Language	English