BT Freestyle 2200 – Edition 03 – 19.02.04 – 5854
Registering new handsets
You can register up to 5 handsets to your BT Freestyle
2200 base.
If you have purchased a Twin, Trio or Quad the
handsets in these packs are pre-registered to the
main base.
However, if you purchase additional BT Freestyle 2200
handsets separately you will need to register them to the
base first for them to work.
Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are
registering the new handset.
2. Press and hold the button on the base for about
10 seconds until you hear a beep and the In Use light
starts flashing.
3. On the handset to be registered, press and hold the
and buttons together until display shows
65-
.
4. Enter the base number. If this is a new handset then the
base number is 1, the display shows
65-1
then
PIN
.
5. Enter and registration starts. When the
handset beeps and returns to standby registration is
complete.
Additional handsets
22