BT Freestyle 2200 – Edition 03 – 19.02.04 – 5854
33
Insert a Pause
1. When storing a number, press and hold until
P
appears in the display.
Recall (R)
is used when connected to certain switchboards/PBXs
and some BT Calling Features, or those services available
via your network provider.
The default recall setting is option S ( 100ms) which is
the standard setting for the Public Telephone Network
and most switchboards/PBXs. Normally, you will not
need to change this setting. However, some
switchboards/PBXs may require a longer recall, in which
case option L (280ms) should be selected.
1. Press and hold then to display the current
settings (S).
2. Press to toggle between the two available
options, S and L.
3. Press to confirm your selection.
Technical information
To Next Page
Loading...
