BT Mini Hub User Manual

Connect your devices
You’ll need your Mini Hub’s wireless network name
and password. They’re on the back of your Mini Hub.
If your device supports WPS,
just press
(WPS) on
your Mini Hub. It’s a quick
way to connect.
BT Mini Hub Settings
Plug in the Mini Hub
Go to the part of your home where you want to
improve your wireless signal. Then plug the Mini
Hub into a power socket on the wall and switch
the socket on. Check that the Mini Hub is also on.
The Power light will come on rst then, within a
minute, the Wireless and Data lights too.
2 3
BT Mini Hub Settings
BT Mini Hub Settings
You’ll need this card
for step 3.
Connect to your BT Mini Hub’s Wireless:
Wireless Network names:
2.4 GHz: BTMiniHub-XXX
5 GHz: BTMiniHub-XXX-5
Wireless Password/key:
XXXXXXXXXXX
Admin Password : 8888WWWW
All done.
WPS
Know your networks
The Mini Hub is dual-band, so you’ll see two
network names on the card, one for the 2.4GHz
band and one for the 5GHz band. The wireless
password is the same for both.
Don’t want to use wireless?
Using an Ethernet cable, connect your device to
either Ethernet port on the top of the Mini Hub.
Power light
Data light Wireless light
Mini Hub
5 For more help, go to bt.com/help/minihub

BT Mini Hub Specifications

General

Brand	BT
Model	Mini Hub
Category	Switch
Language	English