Connect the Mini Connector
1 Plug one end of the Ethernet cable into any
Ethernet port on your Smart Hub.
2 Plug the other end into one of the Ethernet ports
on top of your Mini Connector.
3 Plug the Mini Connector directly into a
power socket on the wall and switch on.
The Power and Ethernet lights will come on.
1
How to set up and get connected
Connect to your
Hub’s Wireless:
Select your Wireless Network:
BTHub6-ABCD
1
Enter your Wireless
Password/key:
8888wwwwwWWW
2
Admin Password for
Hub Manager:
8888WWWW
Power
On | Off
Power
Factory
Reset
USB Gig Ethernet
1 2 3 4
Broadband
Mini Connector
Smart Hub
Using extension leads
You can use power extension leads but you need
to connect them like this:
No free extra socket?
Plug your device or
BT Smart Hub into
the Connector
Power light
Ethernet light
4
To Next Page
Loading...
Need help?
General
