Need help?Do you have a question about the BT SG300 and is the answer not in the manual?
General| Brand | BT |
|---|---|
| Model | SG300 |
| Category | Barcode Reader |
| Language | English |
Provides a visual diagram of the scanner and its components, including indicator LEDs and ports.
Lists the items included in the standard shipment package for the SG300BT scanner.
Guides the user through the initial power-up and connection process for the scanner and cradle.
Advises users on where to find more detailed information or advanced setup options.
Specifies the required operating system, hardware interfaces, and power supply for the scanner.
Details the connection procedure for the scanner cradle using the RS232 interface.
Explains how to connect the scanner cradle using the Keyboard Wedge interface.
Provides instructions for connecting the scanner cradle via the USB interface.
Describes how to connect the cable and adaptor to the cradle and the host device.
Illustrates the correct placement of the skip-resistant pad on the scanner.
Presents a flowchart illustrating the sequence of operations for programming the scanner settings.
Explains how the scanner is set to factory defaults upon initial startup and how to manage settings.
Outlines the general steps for configuring the scanner by scanning programming codes.
Instructions on how to reset all scanner parameters back to their factory default settings.
Shows the programming codes for selecting different interface modes like Keyboard, RS232, and USB.
Lists the available baud rate settings for the RS232 interface.
Details the parity options available for the RS232 communication.
Specifies the selectable data bit configurations for RS232 communication.
Lists the available stop bit settings for RS232 communication.
Describes the different postamble options that can be appended to scanned data.
Explains how to set the scanner's Bluetooth mode, choosing between client and server roles.
Details the scanner's memory mode options, including turning it on, off, reading, and clearing.
Describes the settings for enabling and configuring the scanner's sleep mode to conserve power.
Provides a programming code to enable all supported barcode symbologies simultaneously.
Details how to enable or disable individual barcode symbologies like UPC-A, Code 39, etc.
To Next Page