Safety regulations
© BT 237077-040
10
Handling loads
• Drive with care when collecting or depositing a load.
• Only drive the truck with the forks raised when leaving or col-
lecting a load or when transporting two loads, one on the sup-
port arms and one on the forks. Keep a safe distance from
persons in the immediate area
• Only handle loads that are within the truck’s permitted lifting
capacity. The length/width of the forks should be adapted to
the load’s shape and dimensions.
• Only handle loads that are stable and arranged in a safe
manner.
• Particular care should be exercised when handling long and
high loads.
Parking the truck
• Always park with the load carrier fully lowered and the brake
applied.
• Always park in designated areas if available.
• Never leave the truck parked with the ignition key still in the
ignition.
• Never park the truck on an incline.
• Never park the truck so that it obstructs emergency exits.
• Never park the truck so that it obstructs traffic or work.
Handling the battery
• Always handle the battery and its connections with care.
Read and follow the instructions carefully before replacing or
charging the battery. See chapter Battery.
• Always wear protective glasses when working with the bat-
tery.
• Make sure the battery in the truck is of a weight that corre-
sponds with the information on the truck’s identification plate.
• Make sure the battery is secured in its compartment.
Maintenance and repair
Maintenance instructions should be followed to prevent faults
and accidents, see the Maintenance chart in chapter Mainte
-
nance. Only qualified and BT trained personnel are permitted to
maintain, adjust or repair the truck.
All replacement parts shall be BT approved spare parts.
Modifications or conversions to the truck that affect the safe use
or function are not permitted.
To Next Page
Loading...