Presentation of the truck
© BT 237077-040
14
Presentation of the truck
Good driver ergonomics have a positive influence on productiv-
ity and this knowledge has been a guiding star in the develop-
ment of BT’s stand on stacker vehicles.
The truck is equipped with mini-wheel and progressive electrical
servo. The overhead guard provides very good safety without
impairing vision. The throttle is ergonomically positioned on an
adjustable control panel. All the instruments are placed together
on a clear display unit which provides the driver with all the nec
-
essary information in order to successfully operate the truck, e.g.
hour meter, battery indicator and error codes.
The battery is placed on a roller table, easily accessible for
inspection, replacement and service. The stand on stacking
vehicle’s construction is based on the same advanced tech
-
niques used for BT’s reach trucks, with easy access to compo-
nents and simple servicing.
Intended application of the truck
The truck is solely designed and manufactured to handle goods.
The trucks should be fitted with the appropriate accessories rele
-
vant to the application.
Prohibited application of the
truck
The truck is designed for handling goods indoors. It is not per-
mitted to use the truck for other purposes including the following:
- In areas that contain dust or gases which can cause fires
or explosions
- As a tow-truck for trailers
- To tow other trucks
- To transport/lift passengers
- To drive on gravel or grass
To Next Page
Loading...