BT SSE135 - Lubrication and Oil Specifications; Lubrication Chart; Oil and Grease Specifications

Maintenance
© BT 237077-040
75
Lubrication chart
L= Lubrication C = Check O = Oil change
1)
Change filter after 50 - 100 hrs, and then every 1000 hrs.
Oil and grease specification
Pos no Service point Interval/Running hours Lubricant
250h 1000h 3000h
1 Wheel bearings L A
2 Rollers in the fork carriage L A
3 Mast beam L E
4 Lifting chains L D
5 Hydraulic system C O
1)
B
6 Hinges L A
7 Steering bearings L F
8 Drive gear C O C
Lubricant Specification Application area
> - 15°C < - 15°C
A Grease BT 26777
(Spray)
BT 26777
(Spray)
Bearings and bushings
B Hydraulic oil ISO-L-HM32 ISO-L-HV32 Hydraulic system
C Transmission oil Hypoid oil
SAE 80W/90
Hypoid oil
SAE 75W
Gears
D Grease BT 26778
(Spray)
BT 26778
(Spray)
Chains and wires
E Grease BT 055-70111 BT 055-74320 Side shift forks
F Grease Staburags
NBU 8EP
Staburags
NBU 8EP
Steering bearings