Controls and instruments truck with 360° steering
© BT 237077-040
25
Emergency switch off (3)
• Activate the emergency button (see illustr.) to cut the power
supply in the event of:
- An accident.
- Emergency situation, risk of an accident.
- Welding work.
NOTE!
The battery can be damaged.
When welding using an electric power source the welding cur-
rent can enter the battery.
It is necessary to disconnect the battery.
Key switch (4)
The main power switch for the control current.
0 The power is off and the instrument lighting is off .
1 The power supply is on. The instrument lighting is on and
current is fed to all electronic components.
To Next Page
Loading...