Controls and instruments truck with 180° steering
© BT 237077-040
40
Display (5)
Direction indicator (A)
When selecting the direction of travel an arrow will light indicat-
ing the selected direction.
Display of time (B)
A digital clock indicates the actual time. How to set the time is
explained in the section “Display and programming”.
Display of hour meter reading/error codes (C)
A character display (C) indicates hours and error codes. When
the time meter reading is displayed the indicator window (E) is
lit. The time displayed is as follows:
When the warning/error codes are displayed the indicating win-
dow (G) will be lit. A character E/C will be displayed in the left-
hand side of the character window (D) and the error code in the
right-hand side. The meaning of the codes is explained in the
sections “Warning codes” and “Error codes”.
Battery controller (D)
The battery controller shows the actual charge level of the
truck’s battery.
1 Fully-charged battery
1/2 Half-charged battery
0 Discharged battery
The battery controller has an integrated cut-out function that dis-
connects the truck’s lifting function when a preset charge level is
reached. This prevents overloading the battery and increases
the running economy of the truck. When the battery has reached
a charge level equivalent to 70% discharge a warning signal is
given by flashing lamps. A further 10% of the battery’s capacity
can be used before the battery controller cuts out the lifting func
-
tion.
The hour meter registers the time the drive motor and/or the
pump motor are operating.
Character Time
Key time
Total running time
Drive motor time
Pump motor time
AAC
DEFGHIJ
1/2
1
0
B
To Next Page
Loading...