22
BT Studio ~ 7th Edition ~ 14th May ’02 ~ 4408
Note
If you hear a warning beep when trying to dial a number
in the quickdial memory it means there is no telephone
number stored under that location number.
To dial a number in the Quickdial
memory
Press the TALK button.
Press the QUICKDIAL button.
Enter the location number 0 to 9 under which the
number is stored.
The telephone number will be shown on the
display and dialled.
To delete a number in the Quickdial
memory
Press the QUICKDIAL button.
Enter the location number 0 to 9 under which the
number you wish to delete is stored.
Press the QUICKDIAL button. The number is now
deleted.
(Alternatively, you can overwrite a number stored
with a new number under the same memory
location. Simply follow the To store a number in
the Quickdial memory on page 21).
To Next Page
Loading...
Need help?
General
