If you subscribe to a Caller Display
Service from your network provider
the time will be set when you
receive your first call.
Set the time
1. Press or until
Date & Time Settings
is
displayed then select
OK option.
2. Press or until
Set Time
is displayed, select the
OK option. The first digit is highlighted.
3. Enter the current time in 24-hour format, e.g. for
9:24pm press , , , , then select the
OK
option. You will hear a confirmation tone.
4. Press
and hold to exit and return to standby.
Set the date
1. Press or until
Date & Time Settings
is
displayed then select
OK option.
2.
Set Date
is displayed, select the OK option. The first
digit is highlighted.
3. Enter the current date (dd/mm/yy) e.g. for 15
th
February
2006, press , , , , , , then select
OK option. You will hear a confirmation tone.
4. Press
and hold to exit and return to standby.
Your BT Synergy 4500 is ready for use.
10 Getting started
Synergy 4500 – Edition 3 – 18.04.06 – 7367
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
To Next Page
Loading...
Need help?
General
