44
If you experience any problems, please call the Helpline on 0870 605 8047
To check the audible message alert setting
1. Press and release . The prompt will announce,
‘Message alert on/off’, as appropriate.
To set audible message alert via the base
1. Press and hold to change the setting. The prompt
will announce,
‘Message alert on/off’, as appropriate.
To set audible message alert via the handset
1. Press or until the display shows
Answer
Settings
and select the OK option.
2. Press or until the display shows
Message Alert
and select the OK option.
3. The current setting is highlighted. Press
ON
option button to switch ON or press OFF option button
to switch OFF. An announcement will confirm the setting.
Outgoing messages
The outgoing message is the message a caller first hears
when the answering machine picks up their call. There
are 2 pre-recorded outgoing messages to choose from
(see note opposite) or you can record your own. You can
only record your own outgoing message via the handset.
Answering machine
Synergy 4500 – Edition 3 – 18.04.06 – 7367
Answer and Record
The pre-set Answer and Record
outgoing message, that allows
your caller to leave a message, is
“Hello, your call cannot be taken
at the moment, so please leave
your message after the tone”.
To Next Page
Loading...
