BT YouView - How to Control Your TV Using Your BT TV Remote

Get to know your Ultra HD box
The lights
The lights on the front of your box
show you what it’s doing.
The buttons
As well as using the remote, you can
also control your BT TV box with the
buttons on the top.
Aerial In
Connects to the
aerial wall socket
S/PDIF
Digital audio connection to
your home cinema system
HDMI
Connects to
your TV
Ethernet
Connects to your Hub for
a broadband connection
Power
Connects to the mains power
using the supplied cable
Connecting a separate
sound system
To nd out more about this, go to
bt.com/help/tv or see your sound
system’s user guide.
How to control your TV using your BT TV remote
TV brand Code
Goodmans 2037
Hitachi 2424
JVC 2788
LG 2992
Panasonic 3846
Philips 3951
Samsung 4483
Sharp 4848
Sony 4985
Toshiba 5523
If your make of TV isn’t listed here, you
can nd a full list of brands and codes at
bt.com/help/remote
Using your remote to switch to another device
When switching to another device on your TV (like a games console),
press on your remote, then keep pressing (not the up or
down arrows) to scroll through your choices (like HDMI1).
Maximum volume too low?
If you need to change the volume on your BT TV box after setting up
your remote, hold down
AD
while pressing Vol , Vol .
You can set your BT TV remote to control both your
BT TV box and your TV. Here’s how.
1 Turn on your TV, then look up the four-digit code for your brand of TV
(see the table on the right). Then hold down and until the
blue light on the remote ashes three times.
2 When the ashing stops, enter the four-digit code for your brand of TV
(see the table on the right). The blue light will ash another three times.
3 Hold down until your TV turns o. The blue light will blink while
it turns o.
4 When your TV turns o, let go of and press it again – your TV
should turn back on. Next try Vol , Vol .
For some TV brands, you need to press instead of . So if it’s
not working, try this step again but press .
5 If the volume control works, press . And that’s it!
If it doesn’t work, start again from Step 3.
Once you’ve set up your remote,
you can:
• turn your TV on and o (standby)
• switch to another device
• adjust or mute the volume.
Box status The lights show…
O
On
Low power standby (see page 24)
Active standby (see page 24)
On and recording
Low power standby and recording
26 27 Need some help?Need some help?