Fan-coil adjustment
Press FAN to set the fan speed at the desired level.
If the thermostat manages a fan-coil type load, it is
possible to adjust the fan speed using the dedicated
pushbutton. With MyHome suite you can disable the
automatic speed setting by local key.
Comfort, eco, antifreeze/thermal protection operating modes
Select one of these modes using the MODE key. The thermostat will no longer follow the settings
of the central unit. The sensor mode must be set to automatic to be able to return to the control
unit settings. The mode cannot be changed from the control unit or other control device.
MyHOME_Suite can disable the mode key.
Note: during the adjustment the fan symbol and
the segment for the speed selected flash.
Speed 1
Speed 2
Speed 3
Automatic operation
To Next Page
Loading...
Need help?
General
