Bticino PIVOT - User Manual

1
BT00653-a
346812
1
2
3
4
1
2
3
4
1
2
3
4
MOD
-EN
TECHNICAL SHEETS
Description
4 key accessory for handsets item 344032, and video handsets item 344102, 344122, .
It must be installed inside the handset, in the preset location.
It can be used to perform the listed functions, based on the type of conguration set:
- Intercom call among various system devices and apartments (max. 5)
- control of actuators for additional door locks
- control of actuators for general uses and auto-switching on of the entrance panel
- mixed activations
- paging function through the 2 WIRE sound system
- enabling/disabling of home automation scenarios
- apartment intercom in two-family system
Legend
1 - Key 1
2 - Key 2
3 - Key 3
4 - Key 4
PIVOT 4 key
handset accessory
Conguration
Conguration
The device must be congured sicamente per stabilirne la operating mode:
M - Operating mode
It sets the operating mode allocated to the individual keys of the accessory block.
The mode changes depending on whether the apartment interface, item 346850, has
been installed or not.
MODE FUNCTION OF KEYS WITHOUT item 346850 FOR MULTI-FAMILY SYSTEMS WITHIN THE APARTMENT WITH item 346850
MOD= Direct switching on of the EPs
Direct switching on of the EPs congured with P+1
Direct switching on of the EPs congured with P+2
Direct switching on of the EPs congured with P+3
Direct switching on of the EPs congured with P+4
Control of the actuator for generic loads (Item 346200)
346200 congured with MOD=9 and P=P+1
346200 congured with MOD=9 and P=P+2
346200 congured with MOD=9 and P=P+3
346200 congured with MOD=9 and P=P+4
MOD= 1 Intercom among the apartment with N-1-5 Intercom among Handsets with N=1-5
MOD= 2 Intercom among apartments with interface item 346850 – N=1-4 Intercom among apartments congured with N=1-4
4
3
2
1
4
3
2
1
Selection of MOD congurators

Summary

PIVOT 4 Key Handset Accessory Description

PIVOT 4 Key Handset Accessory Configuration Overview

Legend

Lists the key indicators for the accessory buttons.

Operating Mode (M)

Sets the operating mode for the accessory keys based on interface installation.

Selection of MOD Configurators

Defines the functions of the accessory keys based on MOD settings.

PIVOT 4 Key Handset Accessory Configuration Examples

Example MOD 0

Illustrates direct auto-switching and general use actuator activation.

Example MOD 1

Details intercom functionality for up to 5 system users.

Example MOD 2

Describes intercom functionality for up to 4 users with apartment interface.

Example MOD 5

Shows activation of additional door locks using the accessory.

Example MOD 9

Controls the first 4 scenarios saved in the F420 scenario module.

Example MOD 3 (Mixed Mode)

Combines auto-switching, door lock control, and intercom functions.

Example MOD 3 (Mixed Mode with Item 346850)

Configuration for mixed modes with apartment interface.

Example MOD 7 (Two-Family Systems)

Enables intercom between apartments in a two-family system.

Example MOD 6

Provides intercom and paging functions with sound system loudspeakers.

PIVOT 4 Key Handset Accessory Assembly and Installation

Bticino PIVOT Specifications

General

Brand	Bticino
Model	PIVOT
Category	Telephone Accessories
Language	English