Need help?Do you have a question about the BTL 5000 Shockwave Series and is the answer not in the manual?
Describes the components and connections of the BTL-5000 SWT system.
Defines shockwave and its properties, including pressure, duration, and frequency spectrum.
Explains how shockwaves are generated and the ballistic principle used by the BTL 5000 SWT.
Details the cellular and physiological effects of shockwave therapy on tissues.
Lists the benefits of shockwave therapy, such as non-invasiveness and reduced recovery time.
Outlines potential temporary side effects like erythema, swelling, or increased pain.
Specifies medical conditions and areas where shockwave therapy is indicated.
Lists conditions and situations where shockwave therapy should not be applied.
Details the components and controls on the front panel of the BTL-5000 SWT device.
Describes the connectors and ports located on the rear panel of the BTL-5000 SWT.
Provides step-by-step instructions for setting up and starting the device.
Covers the general operation of the device, including touch screen and keypad usage.
Explains the principles and steps for setting up and initiating shockwave therapy.
Covers the installation and information related to device accessories.
Details various settings for the device, including password, sound, and display options.
Explains shockwave-specific settings like compressor mode and therapy control.
Allows managing client data, assigning therapies, and editing client information.
Enables starting, adjusting, deleting, and sorting user-defined therapies and programs.
Allows users to select, restart, and view parameters of recently performed therapies.
Step-by-step guide for replacing the shock transmitter on the applicator.
Instructions for replacing worn-out tubes and projectiles using the exchangeable kit.
Outlines important safety precautions, general guidelines, and warnings for using the device.
Details the warranty period and conditions for the device and its accessories.
Lists the various industry standards and regulations the device complies with.
General| Pressure | Up to 5 bar |
|---|---|
| Penetration Depth | Up to 60 mm |
| Presets | Pre-set protocols for different indications, User-defined protocols |
| Display | LCD touchscreen |
| Portability | Portable |
| Power Supply | 100-240 V, 50/60 Hz |
To Next Page
