Need help?Do you have a question about the BTL 5000 SWT Series and is the answer not in the manual?
General| Display | Color Touchscreen |
|---|---|
| Intensity | Adjustable |
| Energy Levels | Adjustable |
| Protocols | Pre-set |
| Pulse Modes | Continuous and Burst |
| Timer | Adjustable |
| Power Supply | 100-240 V, 50/60 Hz |
Medical conditions treated by shockwave therapy, e.g., plantar fasciitis, epicondylitis.
Conditions and situations where shockwave therapy is not recommended.
Overview of controls and indicators on the front interface of the device.
Identification of connectors and ports located on the rear panel.
Guidance on unpacking, positioning, and initial setup of the shockwave device.
General operation, including touch screen and numeric keypad usage.
Process for setting up and initiating shockwave therapy sessions.
Selecting therapy parameters using the diagnosis selection method.
Selecting therapy parameters by choosing pre-programmed options.
Manual adjustment of all therapy specifications and saving options.
Explains the three modes for displaying therapy parameters.
How to adjust the total count of shocks for a therapy session.
How to adjust the power or intensity of the shockwave therapy.
Procedures for initiating, pausing, resuming, and concluding a therapy session.
Method for saving customized therapy settings for later use.
Saving therapy parameters and associating them with client records.
Concluding the therapy or stopping the generation of shockwaves.
Configuration options for password, sound, and display settings.
Procedure for setting or changing the device's access password.
Configuration of shockwave generation parameters.
Guided procedure for replacing the applicator kit components.
Crucial safety warnings and precautions for device operation.
Key safety rules to follow during device use and maintenance.
To Next Page