What to do if there is a pressure fault of the compressor in Buchi F-105 Chiller?
If your Buchi Chiller displays a pressure fault of the compressor, immediately switch off the unit and allow the compressor to cool down. If the issue continues after cooling, it is recommended to call a service technician to inspect the system.
What to do if there is a temperature fault in the electronics in Buchi Chiller?
If your Buchi Chiller shows a temperature fault in the electronics, switch off the unit and allow it to cool down. Ensure you clean the air inlet before restarting the unit. If the problem persists after these steps, contact a service technician for assistance.
What to do if Buchi Chiller shows a data fault?
If your Buchi Chiller is showing a data fault, try switching off the unit and restarting it. If the problem continues after restarting, contact a service technician for assistance.
What to do if I see E06 Temperature fault in the electronics on my Buchi F-105?
If your Buchi Chiller shows an 'E06 Temperature fault in the electronics' error, switch off the unit, allow it to cool down, clean the air inlet, and then restart it. If the issue persists, contact service.
What to do if my Buchi F-105 Chiller shows E04 Pressure fault of the compressor?
If your Buchi Chiller displays an 'E04 Pressure fault of the compressor' error, switch off the unit and allow the compressor to cool down. If the problem persists after cooling, contact service to check the system.
How to fix E01 Temperature fault on Buchi F-105?
If your Buchi Chiller is showing an 'E01 Temperature fault', first switch off the unit and then restart it. If the problem continues after restarting, contact service.
What to do if my Buchi Chiller displays E05 Data fault?
If your Buchi Chiller displays an 'E05 Data fault', switch off the unit and restart it. If the problem persists, contact service.
Details uses considered improper and potential consequences.
Explains signal words and symbols used for hazard identification.
Details general hazards associated with instrument handling and necessary precautions.
Specifies required personal protective equipment for safe operation.
Provides guidelines for selecting a suitable and safe location for the instrument.
Details the necessary electrical connections and safety requirements.
Guides the user on how to initiate the cooling process.
Explains the error codes and display messages for troubleshooting.
Lists common malfunctions, their causes, and recommended solutions.
To Next Page
General
