What to do if I see E06 Temperature fault in the electronics on my Buchi F-100?
If your Buchi Chiller shows an 'E06 Temperature fault in the electronics' error, switch off the unit, allow it to cool down, clean the air inlet, and then restart it. If the issue persists, contact service.
What to do if my Buchi F-100 Chiller shows E04 Pressure fault of the compressor?
If your Buchi Chiller displays an 'E04 Pressure fault of the compressor' error, switch off the unit and allow the compressor to cool down. If the problem persists after cooling, contact service to check the system.
How to fix E01 Temperature fault on Buchi F-100?
If your Buchi Chiller is showing an 'E01 Temperature fault', first switch off the unit and then restart it. If the problem continues after restarting, contact service.
What to do if my Buchi F-100 Chiller displays E05 Data fault?
If your Buchi Chiller displays an 'E05 Data fault', switch off the unit and restart it. If the problem persists, contact service.
Defines qualified operators, proper and improper uses to ensure safe operation.
Explains hazard signal words (DANGER, WARNING, CAUTION, NOTICE) and safety symbols.
Covers product design safety, general hazards, and necessary countermeasures.
Emphasizes PPE, built-in safety, and general safety conduct rules.
Detailed table of technical specifications for F-100 and F-105 models.
Lists materials used in instrument construction and their properties.
Describes the basic working principle of the closed-circuit cooler and its models.
Details requirements for selecting a suitable installation site for the chiller.
Explains necessary electrical connections and safety precautions.
Discusses factors influencing the instrument's chilling capacity.
Identifies and describes front-side controls, housing components, and buttons.
Outlines prerequisites and steps for preparing the chiller before operation.
Instructs on starting the chiller and initiating the cooling process.
Explains how to operate the chiller when connected to a BUCHI vacuum controller.
Details how to contact customer service for support, spare parts, and repairs.
Offers guidance on general inspection, cleaning, and component maintenance.
Explains how error messages are displayed on the F-105 model.
Lists common malfunctions, causes, and corrective measures.
Details specific procedures and precautions for storing and transporting the chiller.
Guides on proper and environmentally friendly disposal of the instrument and refrigerant.
Details parts supplied with the instrument in an enclosed parts matrix.
Lists different instrument configurations, accessories, and their order numbers.
General| Temperature stability | ± 0.1 °C |
|---|---|
| Pump capacity | 15 L/min |
| Cooling capacity at 0°C | 1200 W |
| Cooling capacity at -10°C | 800 W |
| Cooling Capacity | 400W @ 20°C |
| Power supply | 230 V / 50 Hz |
| Refrigerant | R134a |
To Next Page
