7.2 General inspection and cleaning instructions
Check the housing for visible defects (switches, plugs, enclosure etc.) and clean it regularly under
safe conditions with a damp cloth. Wipe off any splashes of aggressive chemicals immediately using
a damp cloth in order to avoid any damage being caused to the coating on the housing. Ethanol as a
cleaning agent is also possible to use.
Cleaning under safe conditions
• Switch off the Recirculating Chiller and unplug the power cord.
➡ Let the system reach ambient temperature completely!
• Perform cleaning actions with a damp cloth.
• Regularly clean lamella with a damp cloth to remove dust, at least once a year.
Hoses
• Check the hoses for wear at least every six months.
• Exchange damaged hoses.
Cooling media tank
• Check before prior use the filling level of the Recirculating Chiller
• Exchange the cooling liquid once a year by means of the drainvalve and renew.
To Next Page
Loading...
