What to do if there is a pressure fault of the compressor in Buchi F-108?
If your Buchi Chiller displays a pressure fault of the compressor, immediately switch off the unit and allow the compressor to cool down. If the issue continues after cooling, it is recommended to call a service technician to inspect the system.
What to do if there is a temperature fault in the electronics in Buchi Chiller?
If your Buchi Chiller shows a temperature fault in the electronics, switch off the unit and allow it to cool down. Ensure you clean the air inlet before restarting the unit. If the problem persists after these steps, contact a service technician for assistance.
What to do if Buchi F-108 Chiller shows a data fault?
If your Buchi Chiller is showing a data fault, try switching off the unit and restarting it. If the problem continues after restarting, contact a service technician for assistance.
What to do if I see E06 Temperature fault in the electronics on my Buchi F-108 Chiller?
If your Buchi Chiller shows an 'E06 Temperature fault in the electronics' error, switch off the unit, allow it to cool down, clean the air inlet, and then restart it. If the issue persists, contact service.
What to do if my Buchi F-108 Chiller shows E04 Pressure fault of the compressor?
If your Buchi Chiller displays an 'E04 Pressure fault of the compressor' error, switch off the unit and allow the compressor to cool down. If the problem persists after cooling, contact service to check the system.
How to fix E01 Temperature fault on Buchi Chiller?
If your Buchi Chiller is showing an 'E01 Temperature fault', first switch off the unit and then restart it. If the problem continues after restarting, contact service.
What to do if my Buchi Chiller displays E05 Data fault?
If your Buchi Chiller displays an 'E05 Data fault', switch off the unit and restart it. If the problem persists, contact service.
To Next Page
General
