23
BÜCHI Rotavapor R-3000 8 Replacement parts
Glass assembly V
32305 Glass assembly V STJ 29/32 compl. (as per drawing with 1l evaporating flask and 1l receiving flask)
32311 Glass assembly V STJ 24/40 compl. (as per drawing with 1l evaporating flask and 1l receiving flask)
00636 Vacuum gasket KD-22
00637 Stop-cock STJ 18,8/38
00646 PTFE hose 300 mm
00661 Vacuum connection 29/32
00935 PTFE disk (drip disk)
03275 KS clip
23875 Screw cap GL-10
23900 O-ring 2,7 x 3 mm
25435 Screw cap GL-14
28096 PTFE hose, 600 mm
32014 Flanged screw coupling
32020 V-condenser (incl. 2 x 32885, 23875, 23900, 25435)
32308 V-condenser compl. (00636 + 00637 + 00646 + 00935 + 28096 + 32020)
32339* Vapor duct with Combi clip, STJ 29,2/32, 175 mm (see page 26 for other options)
32885 Hose nipple GL-14, bent, compl.
PLASTIC+GLAS (PLG)
32306 Glass assembly V STJ 29/32 compl. PLG
(as per drawing with 1l evaporating flask uncoated and 1l receiving flask coated)
32312 Glass assembly V STJ 24/40 compl. PLG
(as per drawing with 1l evaporating flask uncoated and 1l receiving flask coated)
32307 V-condenser PLG (2 x 32885, 23875, 23900, 25435)
32309 V-condenser compl. PLG (00636 + 00637 + 00646 + 00935 + 28096 + 32307)
* See Chapter 8.2, Glass components, for other ground-glass joint sizes
See Chapter 8.3, Miscellaneous, for condenser bracket
To Next Page
Loading...
