bring up a “Customization” box that will allow you to change the name, comments and if you
wish to, the colors, depending on your printer. When you are done, click Apply, then OK. Right
click and choose “Export Dialog”. The Exporting box will open and you should change
destination to printer. You can then click on print to get a hard copy.
9. Option Box: Right Click to enter:
a. Viewing Style: Color or Monochrome
b. Font Size: Small to Large (Depends on monitor and Printer)
c. Numeric Precision: Zero to three decimal points
d. Plotting method: Point, Line, Spline or Point & Spline. (Line Recommended)
e. Data Shading: None, Shadow, 3D (None is used with Line)
f. Grid Lines: Both X and Y Axis, Y Axis, X Axis, No Grid (Lines Personal Preference)
g. Grid in Front:
h. Mark Data Points: (Not recommended)
i. Undo Zoom:
j. Maximize: Click here or “Esc” to return from this.
k. Customization Dialog: (Same as double left click)
l. Export Dialog: (For Printing)
m. Help: (Not Available)
10. Export Option: The EZScan files are saved as a *.scn file. These files are ASCII-XY Pairs.
Window’s Notepad can be used to edit the header and tail information in the file and then saved
as an *.prn file. This file can then be imported into GRAMS/AI 7 from Thermo Electron
Corporation if library searches or more powerful file processing is needed. Other word
processors will corrupt the file when they are saved.
11. Removing EZScan: To remove the program from Start, Settings, Control Panel, Add / Remove
Programs highlight EZScan IR and click on the Add / Remove button.
12. Possible Problems:
a. Under Control panel, the Power icon make, sure the energy saver is turned off or set to at
least 60 minutes.
b. Under Control panel, the Display icon make sure the screen saver is turned off or at least set
to 60 minutes.
c. Under Control panel, (if a notebook) the Power icon, the Battery conservation section has to
be set to none.
d. Pen Response must be left at .1 seconds when using EZScan or it will lock the software up.
e. If using Windows 2000 or XP-Pro with security turned on you must be the administrator to
load the program. You must also have the writes to save files (you collect) to the hard drive.
SECTION N
To Next Page
Loading...
