Need help?Do you have a question about the Buderus GB162-65 and is the answer not in the manual?
Details the content and target audience of these installation instructions for competent heating engineers.
Specifies that the pump group is exclusively for installation on the Logamax plus GB162-65/80/100 heating boiler.
Emphasizes the necessity of complying with all relevant regulations at the time of installation.
Provides instructions and safety warnings for connecting the gas supply to the boiler and pump group.
Guides on the procedure for removing the integrated non-return valve, specifying conditions and warnings.
Details the installation of isolating valves for heating flow and return, including pipe connection guidelines.
Explains how to rotate the pressure relief valve body and connect the discharge pipe for safety.
Describes the process of filling and connecting the syphon to the condensate drain outlet, including safety notes.
Outlines regulations and methods for connecting the condensate drain pipe to the syphon.
Details the connection of an expansion vessel in a multi-boiler (cascade) configuration for system safety.
Provides step-by-step instructions for accessing and connecting the pump's electrical components.
Instructs on feeding and fitting the insulation cover correctly, ensuring the control panel door is closed.
To Next Page
General