EasyManuals Logo

Buderus Logano plus GB312 Installation Instructions

Buderus Logano plus GB312
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1
General safety instructions and explanation of symbols
Logano plus GB312 – 6 720 647 367 (2012/11) 5
Danger due to short-circuits
To prevent short circuits, only
use genuine Buderus wiring replacement parts.
Inspection/maintenance
Heating systems should be regularly maintained for the following
reasons:
to achieve a high level of efficiency and to operate
the system economically (low fuel consumption),
to achieve a high level of operational safety,
to maintain the cleanest combustion.
Recommendation for users: sign a maintenance and servicing
contract with an approved heating contractor covering annual
servicing and condition-based maintenance.
Servicing and repairs may only be carried out by an approved heating
contractor.
Immediately correct all faults to prevent system damage.
The operator is responsible for the general and environmental safety
of the heating system.
Use original spare parts only. No liability is assumed for damage
caused by the use of spare parts not supplied by Buderus.
Installation and adjustment
Correct and proper installation and adjustment of the burner and the
control panel are the fundamental requirements for safe and
economical operation of the boiler.
The boiler may only be installed by an approved
heating contractor.
Never change any parts in contact with flue gas.
Work on gas components may only be carried out by qualified and
authorized personnel.
Only qualified electricians are permitted to carry out electrical work.
Installation regulations must be complied with.
▶With sealed combustion appliances: do not cover or reduce the size
of ventilation openings in doors, windows and walls. If draft-proof
windows are fitted, ensure there is an adequate supply of air to the
room for combustion.
Never shut off safety valves!
Water may escape from the safety valve for the hot water system and
piping when the water is being heated.
Instructing the customer
Explain to the customer how the boiler works and how to operate it.
Inform customers that they must not carry out any modifications or
repairs.

Table of Contents

Other manuals for Buderus Logano plus GB312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buderus Logano plus GB312 and is the answer not in the manual?

Buderus Logano plus GB312 Specifications

General IconGeneral
BrandBuderus
ModelLogano plus GB312
CategoryBoiler
LanguageEnglish

Related product manuals