To Next PageTo Next Page
Need help?Do you have a question about the Buderus Logano G115/4 WS and is the answer not in the manual?
Details applicable codes, regulations, and guidelines for correct boiler installation procedures.
Specifies the boiler's design for central heating and domestic hot water systems.
Discusses the importance of water quality to prevent scale, corrosion, and system damage.
Details the boiler's components including heat exchanger, jacket, controls, and suitable burners.
Provides a caution regarding the use of only specified burners with this boiler.
Provides detailed dimensions, connections, and technical data for the boiler models.
Outlines conditions for boiler reliability, service life, and performance optimization.
Specifies temperature, humidity, and air quality requirements for the boiler room.
Details requirements for combustion air intake, including cross-section and quality.
Specifies permissible fuels and requirements for fuel quality and contamination.
Details electrical requirements: voltage, circuit breaker, frequency, and enclosure rating.
Outlines permissible operating pressure and water quality recommendations.
Specifies recommended and minimum wall clearances for installation and maintenance access.
Steps to position the boiler and ensure it is horizontally level.
Covers flue pipe connection, chimney venting requirements, and regulations.
Specifies minimum clearances to combustible materials for flue pipes.
Step-by-step guide for securely installing the flue pipe.
Instructions for connecting water pipes, including the B-kit components.
Procedures for filling the system and performing leak tests at specified pressures.
Instructions for mounting the correct burner and its required specifications.
Guidelines for connecting the fuel supply, including filter and de-aerator.
Instructions for installing the Aquasmart control for boiler temperature regulation.
Instructions for installing the HydroStat control for boiler temperature regulation.
General