To Next PageTo Next Page
Need help?Do you have a question about the Buderus Logano G115/5 WS and is the answer not in the manual?
General| Fuel Type | Oil |
|---|---|
| Efficiency | Up to 93% |
| Max Working Pressure | 3 bar |
| Category | Boiler |
| Combustion Chamber | Cast Iron |
| Water Content | 38 l |
| Type | Logano G115/5 WS |
Specifies the boiler's design for central heating and domestic hot water systems.
Details the boiler's construction: heat exchanger, jacket, and control panel.
Provides technical data, dimensions, and weight for various boiler models.
Outlines required conditions for reliable operation and long service life.
Specifies recommended and minimum wall clearances for boiler installation.
Steps for placing the boiler in its final location and ensuring it is level.
Covers flue pipe connection, chimney venting, and clearance requirements.
Instructions for connecting the B-kit, supply manifold, and drain.
Procedures for filling the heating system and performing a leak test.
Steps for correctly mounting the specified burner onto the boiler.
Details on making the fuel connection in accordance with codes and recommendations.
Covers installation of Aquasmart and HydroStat controls for boiler temperature.
Guide to making electrical connections for boilers with Buderus Logamatic 2107 controls.
Steps for installing the control panel onto the boiler casing.
Instructions for fitting the temperature sensor assembly and burner cable.
Steps to bring the heating system up to normal operating pressure.
Procedure to test the safety relief valve's functionality.
Steps to initiate the control and burner startup sequence.
Methods to increase flue gas temperature if it's too low for chimney conditions.
Methods for cleaning the boiler using brushes or wet cleaning agents.
Guidance on how to reset and address burner-related issues safely.
